Giriş
This guide will show how to remove the brush leads on the DeWalt DW938.
Neye ihtiyacın var
-
-
Use a torque bit screw driver to remove the T10 18.3 mm screw on the handle.
-
Use a torque bit screw driver to remove 6 T10 21.5 mm screws on the handle.
-
-
-
-
Push in locking clips to remove the brush head.
-
Repeat for the other brush.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.