Eşyalarını Tamir Et Topluluk Mağaza

Definitive Technology W7 Speaker Replacement

Giriş

This guide will teach you how to remove the speaker from the Definitive Technology W7

Neye ihtiyacın var

  1. Definitive Technology W7 Speaker Replacement, Speaker: adım 1, 1 resimden 1.

    • Use the metal spudger to pry off the panel at the top of the device.

    • The top panel has the device logo in the center.

    • Use the flat end of the metal spudger and place it between the gaps of the top panel and slowly pry the panel off.

    Düzenle

  2. Definitive Technology W7 Speaker Replacement: adım 2, 1 resimden 1.

    • Remove the thirteen Phillips #0 screws.

    Düzenle

  3. Definitive Technology W7 Speaker Replacement: adım 3, 1 resimden 1.

    • Remove the black panel.

    Düzenle

  4. Definitive Technology W7 Speaker Replacement: adım 4, 2 resimden 1. Definitive Technology W7 Speaker Replacement: adım 4, 2 resimden 2.

    • After you remove the black panel, you will see that the device is covered with a gray mesh, secured with a drawstring.

    • Flick the switch on the middle of the lock down to loosen the sack.

    Düzenle

  6. Definitive Technology W7 Speaker Replacement: adım 5, 1 resimden 1.

    • After you have flicked the switch loosen the sack and pull the sack down which will reveal the speaker.

    Düzenle

  7. Definitive Technology W7 Speaker Replacement: adım 6, 1 resimden 1.

    • Remove the four screws on top of the device on each corner with a Phillips #0 screwdriver.

    Düzenle

  8. Definitive Technology W7 Speaker Replacement: adım 7, 1 resimden 1.

    • Gently lift the top cover off the device.

    Düzenle

  9. Definitive Technology W7 Speaker Replacement: adım 8, 1 resimden 1.

    • If you now look inside the device, you will see the speaker which is the large cylinder on the inner side of the device.

    Düzenle

  10. Definitive Technology W7 Speaker Replacement: adım 9, 2 resimden 1. Definitive Technology W7 Speaker Replacement: adım 9, 2 resimden 2.

    • Remove the four Phillips #0 screws around the speaker holding it in place.

    • Now lay the device on its side with the speaker facing upward, then unscrew the screws around the speaker.

    Düzenle

  11. Definitive Technology W7 Speaker Replacement: adım 10, 1 resimden 1.

    • Stand the device upright and carefully pull the speaker out of the device with the wires still intact.

    Düzenle

  12. Definitive Technology W7 Speaker Replacement: adım 11, 1 resimden 1.

    • Now grab the end of the wire connecting the device to the speaker itself.

    • Slowly and carefully pull the wires away from the speaker.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Jamari Brewster

Üyelik tarihi: 10/26/22

193 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

UMass Dartmouth, Team 2-5, Petersen Fall 2022 UMass Dartmouth, Team 2-5, Petersen Fall 2022 üyesi

UMASSD-PETERSEN-F22S2G5

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 228