Bu sürüm, hatalı düzenlemeler içerebilir. En son doğrulanmış bellek kopyası dönün.
Neye ihtiyacın var
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Loosen the captive screws that secure the base panel to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Disconnect the battery cable from the battery-cable connector.
-
Turn the computer over.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Press and hold the power button for 5 seconds to ground the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Connect the battery cable to the battery-cable connector.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the tabs on the base panel with the slots on the computer base and snap the base panel into place.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Tighten the captive screws that secure the base panel to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screws that secure the solid-state drive bracket to the solid-state drive assembly.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Using the pull tab, pivot the solid-state drive bracket and peel off the bracket from the tabs on the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Using the pull tab, disconnect the solid-state drive cable from the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screws that secure the solid-state drive assembly to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the solid-state drive assembly off the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screw that secures the solid-state drive to the solid-state drive assembly.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Slide and lift the solid-state drive off the solid-state drive assembly.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Slide the NEW solid-state drive into the slot on the solid-state drive assembly.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screw that secures the solid-state drive to the solid-state drive assembly.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the screw holes on the solid-state drive assembly with the screw holes on the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screws that secure the solid-state drive assembly to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Connect the solid-state drive cable to the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the screw holes on the solid-state drive bracket with the screw holes on the solid-state drive assembly.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the latches and disconnect the keyboard and keyboard-backlight cables from the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screws that secure the palm-rest assembly to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the computer base slightly and push the release tabs on the palm-rest assembly until it pops out.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Turn the computer over and open the display as far as possible.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Using a plastic scribe, pry up along the edges of the palm-rest assembly.
-
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the connector latch and disconnect the power-button board cable from the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the keyboard.
-
Remove the power-button board.
-
Remove the status-light board.
-
Remove the Touchpad.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the touchpad.
-
Replace the status-light board.
-
Replace the power-button board.
-
Replace the keyboard.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Connect the power-button board cable to the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the palm-rest assembly on the computer base and snap it into place.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screws that secure the palm-rest assembly to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Connect the keyboard cable and the keyboard-backlight cable to the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screws that secure the hinge caps to the display hinges.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screw that secures the wireless-card bracket to the wireless card.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the antenna cables from the routing guides on the display hinges.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the connector latch and disconnect the display cable from the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the display cable from the routing guides on the display hinges.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Disconnect the logo-board cable from the system board and remove it from the routing guides on the display hinges.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screws that secure the display assembly to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the screw holes on the display hinges with the screw holes on the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screws that secure the display hinges to the computer base.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Route the logo-board cable through the routing guides on the display hinge and connect the logo-board cable to the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Route the display cable through the routing guides on the display hinge.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Slide the display cable into the connector on the system board and press down the latch to secure the cable.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Route the antenna cables through the routing guides on the display hinges.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Adhere the adhesive tapes that secure the antenna cables to the system board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screw that secures the wireless-card bracket to the wireless card.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the screw holes on the hinge caps with the screw holes on the display hinges.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screws that secure the hinge caps to the display hinges.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
-
Using your fingertips, carefully pry up the inside edges of the display bezel.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the connector latches and disconnect the display-board cables from the logo board.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Slide the display-board cables to their respective connectors on the logo board and press down the latches to secure the cables.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the display bezel with the display back-cover and gently snap the display bezel into place.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Remove the screws that secure the display panel to the display back-cover.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the connector latch and disconnect the display cable from the display panel.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Connect the NEW display cable to the display panel and press down on the connector latch to secure the cable.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Lift the connector latch and disconnect the display cable from the display panel.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Connect the NEW display cable to the display panel and press down on the connector latch to secure the cable.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Align the screw holes on the display panel with the screw holes on the display back-cover.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Replace the screws that secure the display panel to the display back-cover.
-