Giriş

Having trouble with your headphones or USB ports? The Input/output board may be the source of your problem. Here is a quick an easy guide to replace your IO board, and get your devices working again!

  1. Remove the eleven 3mm Phillips #1 screws.
    • Remove the eleven 3mm Phillips #1 screws.

  2. Use a plastic opening tool to gently remove the back panel.
    • Use a plastic opening tool to gently remove the back panel.

    • It can be easier to pry open near a corner.

    • Use your fingers to remove the connecting cable to the battery unit. Firmly grab the cord closest to the motherboard connection and pull straight back.

    • Remove the four 2mm screws on the sides of the battery.

    • To remove the battery, lift up on one side to get your fingers underneath and lift away.

    • Remove the single 2mm screw securing the IO board to the laptop.

    • Pull up on the connector to release the IO board cable from the motherboard.

    • It may be easier to pull from the blue tab.

    • Remove the IO board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Damon

Üyelik tarihi: 01-11-2018

181 İtibar

2 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team S5-G1, Gulbrandsen Fall 2018 UMass Dartmouth, Team S5-G1, Gulbrandsen Fall 2018 üyesi

UMASSD-GULBRANDSEN-F18S5G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 36

Her zaman: 68