Ana içeriğe geç

Giriş

This guide provides the steps needed to put the Power Circuit into the correct state and allowing laptop to power on.

  1. (9) 0.7mm Screws holding back cover in place Small plastic tabs holding cover in place.
    • (9) 0.7mm Screws holding back cover in place

    • Small plastic tabs holding cover in place.

  2. (3) 0.4mm screws holding battery in place Once screws are removed battery can be safely removed.
    • (3) 0.4mm screws holding battery in place

    • Once screws are removed battery can be safely removed.

  3. Lift battery up and out with plastic spudger.
    • Lift battery up and out with plastic spudger.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

alarson118

Üyelik tarihi: 24-02-2015

523 İtibar

3 adet Kılavuz yazıldı

Takım

Tech-zone Tech-zone üyesi

Business

2 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 7

Her zaman: 663