Ana içeriğe geç

Giriş

In this guide, we will show you how to remove and replace the Hard Drive.

Parçalar

Hiçbir parça belirtilmedi.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

    • Remove the three screws that secure the hard drive assembly to the computer base.

  2. Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.
    • Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.

  3. Pull the pull-tab on the hard drive bracket to lift the hard drive assembly at an angle and out of the hard drive compartment as shown in the illustration.
    • Pull the pull-tab on the hard drive bracket to lift the hard drive assembly at an angle and out of the hard drive compartment as shown in the illustration.

  4. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  5. Remove the four screws that secure the hard drive bracket to the hard drive and remove the hard drive bracket.
    • Remove the four screws that secure the hard drive bracket to the hard drive and remove the hard drive bracket.

  6. Replace the hard drive bracket and the four screws that secure the NEW hard drive bracket to the hard drive.
    • Replace the hard drive bracket and the four screws that secure the NEW hard drive bracket to the hard drive.

  7. Place the hard drive assembly in the hard drive compartment.
    • Place the hard drive assembly in the hard drive compartment.

  8. Push the hard drive assembly towards the left until it is fully connected to the interposer.
    • Push the hard drive assembly towards the left until it is fully connected to the interposer.

  9. Replace the three screws that secure the hard drive assembly to the computer base.
    • Replace the three screws that secure the hard drive assembly to the computer base.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Terrence15

Üyelik tarihi: 18-12-2017

70.933 İtibar

442 adet Kılavuz yazıldı

Takım

Informative Technologies Inc. Informative Technologies Inc. üyesi

Community

15 Üyeler

930 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 136