Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

The following guide will give instructions on how to properly replace the hard drive on your Dell Inspiron 15-5552.

Parçalar

Hiçbir parça belirtilmedi.

  1. Make sure the laptop is powered down before you remove the battery.
    • Make sure the laptop is powered down before you remove the battery.

  2. Locate the battery release switch on the bottom of the laptop.
    • Locate the battery release switch on the bottom of the laptop.

  3. Slide the battery release switch away from the lock symbol towards the “unlock” position. A click sound will let you know it has unlocked.
    • Slide the battery release switch away from the lock symbol towards the “unlock” position. A click sound will let you know it has unlocked.

  4. The battery will rotate outward.  By, lifting the bottom lip that pops out and rotating it towards the top of the laptop until the battery comes free from the laptop. The battery will rotate outward.  By, lifting the bottom lip that pops out and rotating it towards the top of the laptop until the battery comes free from the laptop.
    • The battery will rotate outward. By, lifting the bottom lip that pops out and rotating it towards the top of the laptop until the battery comes free from the laptop.

  5. To remove the rear-cover. Flip the device on its back, and locate the screws as illustrated. Use a J0 bit tipped screwdriver to unscrew the two 6 mm Phillips screws on the back panel.
    • To remove the rear-cover. Flip the device on its back, and locate the screws as illustrated.

    • Use a J0 bit tipped screwdriver to unscrew the two 6 mm Phillips screws on the back panel.

    • Make sure your device is powered down and unplugged before beginning the replacement.

  6. Using a spudger, lightly lift the RAM cover up and at an angle, away from the computer. Using a spudger, lightly lift the RAM cover up and at an angle, away from the computer.
    • Using a spudger, lightly lift the RAM cover up and at an angle, away from the computer.

  7. The Hard Drive
    • The Hard Drive

  8. Remove the four 6 mm Philips screws on the hard drive, using the J0 bit tipped screwdriver.
    • Remove the four 6 mm Philips screws on the hard drive, using the J0 bit tipped screwdriver.

  9. Lift hard drive out of the computer slightly
    • Lift hard drive out of the computer slightly

    • Be careful not to tear the ribbon that attaches the hard drive to the computer when lifting it.

  10. Using  two  fingers, grab the black connector on the ribbon, and pull until detached. Using  two  fingers, grab the black connector on the ribbon, and pull until detached.
    • Using two fingers, grab the black connector on the ribbon, and pull until detached.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 7

Son 7 gün: 20

Son 30 gün: 31

Her zaman: 203