Giriş

This guide will be utilized mainly if your CPU has gone bad and your laptop is essentially nonfunctional.

Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.
  • Before attempting to remove the battery ensure that the laptop is disconnected from all power sources and turned off.

  • Turn the laptop over to its back.

Yorum Ekle

Slide the release latch while simultaneously pulling backwards on the battery.
  • Slide the release latch while simultaneously pulling backwards on the battery.

Yorum Ekle

  • Slide the battery out of the battery bay.

Yorum Ekle

  • Unscrew the four screws (3mm Phillips #1) that hold the base cover in place.

  • The screws are connected to the base cover by a washer anddo not remove from the base cover.

Yorum Ekle

  • Carefully lift the base cover vertically away from the laptop.

Yorum Ekle

  • Loosen the 5 screws (4mm, Phillips #1) that secure the CPU Heat Sink to the motherboard.

  • These screws are held in place by a washer so you should not be able to completely remove the screws.

My fifth screw, (the one towards the bottom), won't unscrew. Anybody that can help?

Michael Shirley - Yanıt

  • Pull up on the Heat Sink unit to remove it.

Yorum Ekle

  • Using a flathead screwdriver, rotate the locking mechanism counterclockwise to the unlocked position.

Yorum Ekle

  • The CPU is very fragile and has thin pins.

  • Remove the CPU by pulling straight upward and away from the laptop.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 başka kişi bu kılavuzu tamamladı.

Nathan Lemay

Üyelik tarihi: 16-04-2014

2.515 İtibar

15 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-14, Regan Spring 2014 Cal Poly, Team 9-14, Regan Spring 2014 üyesi

CPSU-REGAN-S14S9G14

4 Üyeler

15 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 14

Her zaman: 1,347