Parçalar

Hiçbir parçaya gerek yok.

  1. Flip to the back side of the laptop
    • Flip to the back side of the laptop

  2. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  3. Loosen one screw.
    • Loosen one screw.

    • This screw is attached to the panel and cannot be removed.

  4. Spread out pins on the opposite sides. The chip will spring up at an angle. Place new chip in at a 30 degree angle. Push inward until pins can't be seen.
    • Spread out pins on the opposite sides. The chip will spring up at an angle.

    • Place new chip in at a 30 degree angle.

    • Push inward until pins can't be seen.

    • Push RAM down, so it lays flat.

    • Improperly replacing the RAM will cause it to short-circuit.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

May Chauvin

Üyelik tarihi: 14-04-2011

201 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 12-34, Maness Spring 2011 Cal Poly, Team 12-34, Maness Spring 2011 üyesi

CPSU-MANESS-S11S12G34

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 12

Her zaman: 3,798