Ana içeriğe geç

Giriş

This guide is very important for other guides, as the battery must be removed before dealing with electronic connections within the computers encasement.

  1. Make sure that the computer is turned off and is disconnected from external power source.
    • Make sure that the computer is turned off and is disconnected from external power source.

    • Turn it upside down and locate the battery release switch.

  2. While holding the switch in the open position, lift out the battery. If you plan to work on any internal laptop components, press and hold the power button for 5 seconds. This will dissipate any residual charge on the motherboard to prevent electrical shock when you begin to handle it.
    • While holding the switch in the open position, lift out the battery.

    • If you plan to work on any internal laptop components, press and hold the power button for 5 seconds. This will dissipate any residual charge on the motherboard to prevent electrical shock when you begin to handle it.

Sonuç

To replace your battery, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Malik Shahbal

Üyelik tarihi: 05-10-2010

471 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 22-5, Maness Fall 2010 Cal Poly, Team 22-5, Maness Fall 2010 üyesi

CPSU-MANESS-F10S22G5

4 Üyeler

11 adet Kılavuz yazıldı

Bir Yorum

I think it would be complete if we knew where to buy it as well.

Nobody would read up on changing a battery if he didn’t need one, so you might as well tell him where to get it.

I think that makes sense. However thank you for your effort.

kjanmunkedal - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 4,074