Dell Latitude 5480 Display Replacement

Giriş

Users can look to this guide if they are looking to replace their screen for the Dell Latitude 5480 laptop. Screens provide visuals for users. Users will want to replace their screen if it is cracked or their screen appears black.

Neye ihtiyacın var

Adım 1 Lower Case

Dell Latitude 5480 Display Replacement, Lower Case: adım 1, 1 resimden 1.

Use a Phillips screwdriver to remove the eight 5.6 mm screws that secure the lower case.

Düzenle

Adım 2

Dell Latitude 5480 Display Replacement: adım 2, 3 resimden 3.

Insert an opening tool into the seam between the lower case and chassis.
Pry up around the perimeter of the device until the lower case fully releases.
Lift off the lower case.

Düzenle

Adım 3 Battery

Dell Latitude 5480 Display Replacement, Battery: adım 3, 2 resimden 1.

Dell Latitude 5480 Display Replacement, Battery: adım 3, 2 resimden 2.

Remove the four 5.6 mm Phillips screws that secure the battery.

Düzenle

Adım 4

Dell Latitude 5480 Display Replacement: adım 4, 3 resimden 3.

Lift the battery up and out of the chassis.

Düzenle

Adım 5 Display

Dell Latitude 5480 Display Replacement, Display: adım 5, 3 resimden 1.

Dell Latitude 5480 Display Replacement, Display: adım 5, 3 resimden 2.

Dell Latitude 5480 Display Replacement, Display: adım 5, 3 resimden 3.

Insert a plastic card between the bezel and the display.
Slide the plastic card beneath the entire bezel to sever the adhesive that secures the bezel.
Lift the bezel off of the display.

Düzenle

Adım 6

Dell Latitude 5480 Display Replacement: adım 6, 3 resimden 3.

Remove the four 5.6 mm Phillips head screws, one at each corner, to release the display assembly.
Gently lift away the display panel and set it on top of the keyboard.
Take care not to strain the display assemble cable.

Düzenle

Adım 7

Dell Latitude 5480 Display Replacement: adım 7, 3 resimden 3.

On the bottom of the back of the display panel, remove the tape that secures the cable connecting the screen to the base of the computer.
Flip up the display cable locking bar.
Disconnect the display connector.
Remove the display.