Ana içeriğe geç

Giriş

Use this guide to replace an unresponsive or sticky keyboard on your Dell Latitude E4310.

  1. Power down the laptop and remove all power cords.
    • Power down the laptop and remove all power cords.

  2. Push in the battery release button with your thumb. Pull up on the battery to remove.
    • Push in the battery release button with your thumb.

    • Pull up on the battery to remove.

  3. Insert the pointy end of the spudger underneath the power button panel and pry upwards to pop off. Do the same steps for the other side.
    • Insert the pointy end of the spudger underneath the power button panel and pry upwards to pop off.

    • Do the same steps for the other side.

  4. Remove the two Phillips #0 screws. Remove the two Phillips #0 screws. Remove the two Phillips #0 screws.
    • Remove the two Phillips #0 screws.

  5. Flip the laptop over and remove the two Phillips #0 screws.
    • Flip the laptop over and remove the two Phillips #0 screws.

  6. Insert the pointy end of the spudger underneath the edge of the keyboard and pry upwards to lift up. Once lifted, grab the keyboard and pull out to remove.
    • Insert the pointy end of the spudger underneath the edge of the keyboard and pry upwards to lift up.

    • Once lifted, grab the keyboard and pull out to remove.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Laura Lujan

Üyelik tarihi: 21-02-2018

326 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 12

Son 30 Gün: 61

Her zaman: 1,090