Ana içeriğe geç

Giriş

If the user would like to replace a faulty cooling fan, or one that running too loudly, this guide will give step by step information on how to achieve this.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew the single 3.5mm Phillips #1 screw that holds on the bottom plate of the device.
    • Unscrew the single 3.5mm Phillips #1 screw that holds on the bottom plate of the device.

  2. Place your hands on the plate and pull it toward yourself. The plate will pop out of place and may then be removed.
    • Place your hands on the plate and pull it toward yourself.

    • The plate will pop out of place and may then be removed.

  3. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  4. The cooling fan is located near the edge of the device, on the side with the vent, and is contained within a plastic shroud.
    • The cooling fan is located near the edge of the device, on the side with the vent, and is contained within a plastic shroud.

  5. Unscrew the two 9mm Phillips #1 screws that secure the fan in place. Disconnect the fan header from the motherboard of the laptop. The fan header has many small wires sleeved together. To avoid ripping the wires out of the connector, wiggle the connector out of place instead of pulling straight up on it.
    • Unscrew the two 9mm Phillips #1 screws that secure the fan in place.

    • Disconnect the fan header from the motherboard of the laptop.

    • The fan header has many small wires sleeved together. To avoid ripping the wires out of the connector, wiggle the connector out of place instead of pulling straight up on it.

  6. Remove the fan from its housing.
    • Remove the fan from its housing.

    • The fan may be difficult to get out of the housing, as it is surrounded on three sides by the housing itself and the heatsink. It is not glued or taped in, however, so you can gently pull the cord you just disconnected up to remove the fan from the housing without risk of damaging the cord.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Richard Harrison

Üyelik tarihi: 23-10-2016

739 İtibar

4 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 2-4, Isaacson Fall 2016 UMass Dartmouth, Team 2-4, Isaacson Fall 2016 üyesi

UMASSD-ISAACSON-F16S2G4

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 11

Her zaman: 746