1. Turn the laptop over so that the bottom is facing up. Remove the two #0 3 mm screws holding the cover plate.
    • Turn the laptop over so that the bottom is facing up.

    • Remove the two #0 3 mm screws holding the cover plate.

  2. Push both metal retaining clips outward at the same time using your hands carefully.
    • Push both metal retaining clips outward at the same time using your hands carefully.

    • If done correctly the memory should pop up at a 45 degree angle.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Gently pull the memory out of the retainer at the same 45 degree angle.
    • Gently pull the memory out of the retainer at the same 45 degree angle.

  5. Insert the new memory at 45 degree angle.
    • Insert the new memory at 45 degree angle.

  6. Ensure the memory is in all the way before pressing the memory downward until both metal retainer clips are snapped into place.
    • Ensure the memory is in all the way before pressing the memory downward until both metal retainer clips are snapped into place.

Sonuç

To reassemble your device, reinstall cover plate with two #0 screws.

Thomas Wong

Üyelik tarihi: 20-01-2012

23 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-20, Maness Winter 2012 Cal Poly, Team 11-20, Maness Winter 2012 üyesi

CPSU-MANESS-W12S11G20

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 6

Her zaman: 2,012