Giriş

Replacing Hard Drive on the GX100 is very easy. Consider, maybe the fact that dell Tried to make it possible to take apart most of the machine not using any screws.

  1. pull cover UP while holding in the 2 buttons on either side of the optiplex.
    • pull cover UP while holding in the 2 buttons on either side of the optiplex.

  2. Pull Ribbon Cable Straight Back, and Out of Cd drive Using the Plastic Tab.
      • Pull Ribbon Cable Straight Back, and Out of Cd drive Using the Plastic Tab.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Pull Power Cable Out of Cd drive.
    • Pull Power Cable Out of Cd drive.

    • All Cables Will Take A Bit Of Wiggling to Come Out.

  5. Remove power cable from floppy drive.
    • Remove power cable from floppy drive.

Sonuç

To reassemble your device, follow these instructions in reverse order.

hans

Üyelik tarihi: 13-07-2010

101 İtibar

1 Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 5

Her zaman: 502