Giriş

Remove and Replace the Hard Drive

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    Yorum Ekle

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    Yorum Ekle

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Unplug the blue cable that connects the hard drive to the motherboard.

    Yorum Ekle

    • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

    Yorum Ekle

    • Squeeze the release tabs on either side of the hard drive.

    Yorum Ekle

    • Slide the Hard Drive out while squeezing the tabs.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 başka kişi bu kılavuzu tamamladı.

Wyatt

Üyelik tarihi: 06-10-2010

742 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 22-4, Maness Fall 2010 Cal Poly, Team 22-4, Maness Fall 2010 üyesi

CPSU-MANESS-F10S22G4

4 Üyeler

13 adet Kılavuz yazıldı

2 Yorum

Thanks for great tutorial.

Politers - Yanıt

Yeah great tutorial!

Rebinas - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 10

Her zaman: 5,398