Giriş

Replace the Heat Sink on the Motherboard to maintain optimal performance

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    Yorum Ekle

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    Yorum Ekle

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    Yorum Ekle

    • Remove the large blue cover from the computer, there are no screws or tabs keeping it in place.

    Yorum Ekle

    • Press down on the release tab above the heat sink.

    Yorum Ekle

    • Pull the heat sink out of the computer while pressing on the release tab.

    • When reassembling make sure to clean the processor and heat sink of all old thermal paste and apply new paste to the processor

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

Tom

Üyelik tarihi: 04-10-2010

799 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 22-4, Maness Fall 2010 Cal Poly, Team 22-4, Maness Fall 2010 üyesi

CPSU-MANESS-F10S22G4

4 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 9

Her zaman: 5,641