Ana içeriğe geç

Bu sürüm, hatalı düzenlemeler içerebilir. En son doğrulanmış bellek kopyası dönün.

Neye ihtiyacın var

  1. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 1, 1 resimden 1.
    • Remove the screws that secure the back cover to the computer.

    • Pry the edges of the back cover from all sides, to release the back cover.

    • Lift the back cover from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  2. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 2, 1 resimden 1.
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the screws that secure the battery to the computer [2].

    • Lift and remove the battery from the computer [3].

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  3. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 3, 1 resimden 1.
    • Lift the plastic enclosure covering the top of the memory module compartment.

    • Pull the retention clips from the memory module until it pops up.

    • Remove the memory module from the connector on the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Bitiş Çizgisi

Johnathan Hammond

Üyelik tarihi: 02/28/18

44.953 İtibar

408 adet Kılavuz yazıldı

Ekip

RampUP America, Inc. RampUP America, Inc. üyesi

Community

42 Üyeler

1.985 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 8

Son 30 gün: 9

Her zaman: 254