Ana içeriğe geç

Giriş

In this guide, we will be showing you how to remove the Hard Drive.

Parçalar

Hiçbir parça belirtilmedi.

  1. Disconnect the battery cable from the system board.
    • Disconnect the battery cable from the system board.

    • Remove the screws that secure the battery to the palm-rest assembly.

    • Lift the battery, along with its cable, off the palm-rest assembly.

    • Turn the computer over, open the display, and press the power button for about five seconds to ground the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  2. Remove the screw that secures the mSATA card to the palm-rest assembly.
    • Remove the screw that secures the mSATA card to the palm-rest assembly.

    • Slide the mSATA card out of the mSATA-card connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Bitiş Çizgisi

Bir başkası bu kılavuzu tamamladı.

Johnathan Hammond

Üyelik tarihi: 28-02-2018

36.011 İtibar

408 adet Kılavuz yazıldı

Takım

Informative Technologies Inc. Informative Technologies Inc. üyesi

Community

15 Üyeler

930 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 146