Ana içeriğe geç

Giriş

How to remove the base (bottom) cover and power light board, which must be removed to access the battery. The images and information in this guide were taken from this computer's service manual, which can be found on the product page.

Parçalar

Hiçbir parça belirtilmedi.

  1. After turning off the computer, use a Torx 5 screwdriver to remove the 10 screws (#2) from the computer's base.
    • After turning off the computer, use a Torx 5 screwdriver to remove the 10 screws (#2) from the computer's base.

    • Using a prying tool or a fingernail, lift up the base cover (#1).

  2. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  3. Lift up the small latch which holds down the power-light board cable (#3) down. Remove the cable by pulling out sideways.
    • Lift up the small latch which holds down the power-light board cable (#3) down. Remove the cable by pulling out sideways.

    • After removing the Philips screw which holds down the power-light board (#1), remove the power light board (#2) and its cable.

Sonuç

To reassemble your device, follow these instructions in reverse order.

William Daniels

Üyelik tarihi: 06-04-2018

693 İtibar

6 adet Kılavuz yazıldı

Takım

Informative Technologies Inc. Informative Technologies Inc. üyesi

Community

15 Üyeler

930 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 10

Her zaman: 179