Ana içeriğe geç

Giriş

This guide is used as a prerequisite for replacing internal parts in the Dell XPS 18

  1. Turn the device on its screen.
    • Turn the device on its screen.

    • Remove the ten 4mm screws using a T8 Torx screwdriver.

  2. Gently flip out support feet located near the bottom of device.
    • Gently flip out support feet located near the bottom of device.

  3. Gently lift the back cover off the device. The back cover should come off easily.
    • Gently lift the back cover off the device. The back cover should come off easily.

  4. Use the opening tool's angled edge to lift the clasps securing the screen and motherboard cables.
    • Use the opening tool's angled edge to lift the clasps securing the screen and motherboard cables.

  5. Disconnect the screen and copper colored motherboard cables and tuck them under the device to prevent future hassle. Disconnect the screen and copper colored motherboard cables and tuck them under the device to prevent future hassle.
    • Disconnect the screen and copper colored motherboard cables and tuck them under the device to prevent future hassle.

  6. Remove the two black 3mm screws from the internal cover with a Phillips 00 screwdriver. Remove the internal cover.
    • Remove the two black 3mm screws from the internal cover with a Phillips 00 screwdriver.

    • Remove the internal cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Austin Weir

Üyelik tarihi: 31-01-2015

1.214 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 6-29, Amido Winter 2015 Cal Poly, Team 6-29, Amido Winter 2015 üyesi

CPSU-AMIDO-W15S6G29

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 33