Ana içeriğe geç

Giriş

This guide will show you how to replace the support feet if you have broken one.

  1. Turn the device on its screen.
    • Turn the device on its screen.

    • Remove the ten 4mm screws using a T8 Torx screwdriver.

  2. Gently flip out support feet located near the bottom of device.
    • Gently flip out support feet located near the bottom of device.

  3. Gently lift the back cover off the device. The back cover should come off easily.
    • Gently lift the back cover off the device. The back cover should come off easily.

  4. Fold down the support foot.
    • Fold down the support foot.

  5. Remove the two silver 3mm screws with a Phillips 00 screwdriver.
    • Remove the two silver 3mm screws with a Phillips 00 screwdriver.

  6. Remove the silver metal piece holding the support feet down.
    • Remove the silver metal piece holding the support feet down.

  7. Remove the support foot.
    • Remove the support foot.

    • Follow these same steps for the remaining support foot.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Austin Weir

Üyelik tarihi: 31-01-2015

1.214 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 6-29, Amido Winter 2015 Cal Poly, Team 6-29, Amido Winter 2015 üyesi

CPSU-AMIDO-W15S6G29

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 10

Her zaman: 1,795