Eşyalarını Tamir Et Topluluk Mağaza

Dell XPS 18 Touch Control Board Replacement

Giriş

This guide will show you how to replace the touch control board on your Dell XPS 18. Replacement for this part is required if you cannot seem to get the touchscreen to work.

Neye ihtiyacın var

  1. Dell XPS 18 Touch Control Board Replacement, Back Cover: adım 1, 1 resimden 1.

    • Turn the device on its screen.

    • Remove the ten 4mm screws using a T8 Torx screwdriver.

    Düzenle

  2. Dell XPS 18 Touch Control Board Replacement: adım 2, 1 resimden 1.

    • Gently flip out support feet located near the bottom of device.

    Düzenle

  3. Dell XPS 18 Touch Control Board Replacement: adım 3, 1 resimden 1.

    • Gently lift the back cover off the device. The back cover should come off easily.

    Düzenle

  5. Dell XPS 18 Touch Control Board Replacement, Internal Cover: adım 4, 1 resimden 1.

    • Use the opening tool's angled edge to lift the clasps securing the screen and motherboard cables.

    Düzenle

  6. Dell XPS 18 Touch Control Board Replacement: adım 5, 2 resimden 1. Dell XPS 18 Touch Control Board Replacement: adım 5, 2 resimden 2.

    • Disconnect the screen and copper colored motherboard cables and tuck them under the device to prevent future hassle.

    Düzenle

  7. Dell XPS 18 Touch Control Board Replacement: adım 6, 2 resimden 1. Dell XPS 18 Touch Control Board Replacement: adım 6, 2 resimden 2.

    • Remove the two black 3mm screws from the internal cover with a Phillips 00 screwdriver.

    • Remove the internal cover.

    Düzenle

  8. Dell XPS 18 Touch Control Board Replacement, Touch Control Board: adım 7, 2 resimden 1. Dell XPS 18 Touch Control Board Replacement, Touch Control Board: adım 7, 2 resimden 2.

    • Disconnect the black camera cable and pull it back to prevent future hassle.

    Düzenle

  9. Dell XPS 18 Touch Control Board Replacement: adım 8, 2 resimden 1. Dell XPS 18 Touch Control Board Replacement: adım 8, 2 resimden 2.

    • Use the angled edge of the plastic opening tool to lift the clasp securing the touch control board cable.

    • Disconnect the silver and blue touch control board cable.

    Düzenle

  10. Dell XPS 18 Touch Control Board Replacement: adım 9, 2 resimden 1. Dell XPS 18 Touch Control Board Replacement: adım 9, 2 resimden 2.

    • Remove the two silver 3mm screws holding the touch control board in place with a Phillips 00 screwdriver.

    • Remove the touch control board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Austin Weir

Üyelik tarihi: 01/31/15

1.287 İtibar

8 adet Kılavuz yazıldı

Rozetler: 18

+15 tane daha rozet

Ekip

Cal Poly, Team 6-29, Amido Winter 2015 Cal Poly, Team 6-29, Amido Winter 2015 üyesi

CPSU-AMIDO-W15S6G29

4 Üyeler

16 adet Kılavuz yazıldı

2 Yorum

It worked perfectly. Thank you.

Kenneth Macdonald - Yanıt

Which of Torx screwdrivers is used in step 1? As I can see, it is T8, but right above the Introduction section it is stated it is Torx T9...

Евгений Громов - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 1,897