Giriş
Het is tijd om de "grootste" iPhone ooit te demonteren—nog een fractie groter dan die van vorig jaar, komt de iPhone 6s Plus met dubbel zoveel nieuwe technologie. Voor diegenen die hier zijn gekomen vanaf de iPhone 6s demontage, welkom terug! Hier bij iFixit hebben we de gewoonte om alle onderste stenenschroeven boven te halen—dus nu de eerste telefoon uit elkaar is gehaald, richten we onze aandacht op haar Plus-sized tegenhanger.
Kun je niet genoeg krijgen van al die demontages? Wij ook niet! Volg ons op Facebook, Instagram of Twitter voor alle laatste nieuwtjes uit de reparatiewereld.
Neye ihtiyacın var
Videoya Genel Bakış
-
-
Voordat deze "bad boy" onder
het mesde spudger gaat, moeten we even vragen: "Hey Siri, wat zit er aan de binnenkant?": -
Apple A9 processor met ingebouwde M9 motion coprocessor
-
16, 64 of 128 GB aan opslag
-
5.5-inch 1920 x 1080 pixels (401 ppi) Retina HD-scherm met 3D Touch
-
12 MP iSight-camera die ook 4K videorecording, met 1.22µ ondersteunt, en een 5 MP FaceTime HD-camera
-
7000 Series aluminium behuizing en Ion-X glas
-
802.11a/b/g/n/ac Wi-Fi met MIMO + Bluetooth 4.2 + NFC + 23-band LTE
-
Trilmotor
-
-
-
De 6s Plus biedt zich aan voor een goede close-up en geeft ons een inkijkje in die op maat gemaakte 7000 series aluminiumlegering en pronkt daarbij met een nieuw modelnummer: A1687
-
Een vroege analyse van deze nieuwe legering verdeelt het in ongeveer 91.17% aluminium, 0.08% ijzer, 7.64% zink en 0.106% wolfraam.
-
De grotere hoeveelheid zink zou een significante toename in treksterkte (en productiekosten) ten opzichte van de 6063 aluminiumlegering in de iPhone 6 tot gevolg moeten hebben.
-
De kleine "S" lijkt een beetje misplaatst op de nieuwe, grote iPhone behuizing—maar hoe moet je anders aan je vrienden laten zien dat je ieder jaar een nieuwe telefoon koopt?
-
Nee, maar echt, Apple's moeite om snellere upgrades aan te moedigen is een klap onder de gordel voor het milieu. Hoe recycle-vriendelijk ze ook claimen te zijn, een kortere levensduur van producten betekent automatisch meer uitstoot van kooldioxide en meer e-afval.
I would venture to say that most of the "old" iPhones get handed-down or sold second-hand. I have had EVERY iPhone since 2007 (yes, at some point every model... repairing/trading etc...) and I have sold or handed down every single one... I would imagine there are many more brands filing the waste basket when they have almost no resale value after the year is up...
Apple goes out of their way with planned obsolescence with every single one of their products, it isn't just phones. There is no reason why your $4,500 Mac book pro should not have an upgradable CPU, RAM, Storage, GPU, replaceable batteries, etc. Apple leads the pack when it comes to ripping you and mother nature off. PS, I'm no tree hugging hippie-crite... I'm using pure logic and common sense here. Yes, almost every maker of everything these days pushes planned obselessance. Apple is just the best at it. (Ever heard of the "Steve Jobs reality distortion field"? Well now it's just the apple reality distortion field now that his own arrogance and stupidity took him out of circulation. He was a horrible, I'm sorry to disrespect humanity this way, person, An extremely rich, yet morally worthless theif. Your argument is invalid sir.
-
-
-
Tijd voor een sneak peek! Zoals gewoonlijk zullen we weer dwars door deze iPhone heen kijken: onze vrienden van Creative Electron hebben hun röntgentechnologie mee "down under" genomen!
-
iPhone, you better run, you better take cover.
-
Onze mechanici zijn naar het ondersteboven land dat Australië heet gereisd om deze live demontage mogelijk te maken, maar zij hadden het niet kunnen doen zonder de gastvrijheid van Macfixit en Circuitwise!
-
Nu het moment waarop jullie allemaal hebben gewacht—laten we beginnen met demonteren!
-
-
Bu adımda kullanılan alet:iSclack$24.99
-
Aangezien we zojuist nog de 6s hebben gedemonteerd, weten we precies waar we moeten beginnen met de Plus.
-
Onze demontagetechneut krijgt het in twee seconden voor elkaar de telefoon open te krijgen—een seconde voor elke schroef, alle adviezen over voorzichtigheid in de wind geslagen. (Grapje, hij is eigenlijk heel voorzichtig en neemt ruimschoots de tijd. Dit is namelijk de enige 6s Plus die we hebben.)
-
Net als haar kleinere zusje, bevat de 6s Plus een kleefstrip langs de buitenkant van de schermmodule. Gelukkig voor ons maakt het geen schijn van kans tegen de iSclack.
-
Nu we de Pentalobe schroeven eruit hebben gedraaid en de kleefstrips rondom het scherm hebben verslagen, zijn we binnen!
-
-
-
De batterijaansluiting is de eerste prioriteit op weg naar de eeuwige glorie der demontages.
-
Net zoals met de 6s, zijn we blij te ontdekken dat alle schroeven binnenin de 6s Plus Phillips schroeven blijken te zijn. Hoe minder Pentalobe schroeven er te vinden zijn, des te blijer worden wij.
OK, I disassemble it, but there are screws with different length! Which one in which hole? Why didn’t you describe it? :(
This isn’t a guide. If it’s instructions you’re looking for, they’re located over here.
-
-
-
Met drie zwaaien van de spudger, krijgen we het snel voor elkaar de schermmodule los te koppelen en te verwijderen.
-
Voordat we verder gaan, gooien we de schermmodule op de weegschaal. We noteren dat de schermmodule van de 6s Plus 80 g weegt—terwijl die van de 6 Plus van vorig jaar slechts een schamele 60 g woog.
-
Deze verbazingwekkende toename van 33% komt volledig door Apple's nieuwe 3D Touch-technologie. Dat is zware stuff.
-
Een vlugge vlaag röntgenstraling onthult de aanwezigheid van wat nieuwe silicoon dat meelift op het scherm—net zoals we in de 6s vonden.
-
-
-
Een nieuw plaatje bevestigt de (kleine!) trilmotor en de bijbehorende nieuwe kabel.
-
De afmetingen van de trilmotor in de 6s Plus zijn 15 x 8 x 4.9 mm, ten opzichte van de 35 x 6 x 3.2 mm van de trilmotor in de 6s.
-
Zonder twijfel—alles wat erin zit, past allemaal maar net.
-
De trilmotor bevat ook een kleine rubberen bumper om de microfoon tegen de trillingen te beschermen.
-
-
-
-
We plopten de trilmotor lang genoeg terug op z'n plek om deze zijn zo welbekende bewegingen te laten maken.
-
Hij wist duidelijk niet dat 'ie bekeken werd.. Caught in the act..
-
-
-
Verdergaand met de batterij, worden we begroet door wat oude bekenden—kleefstrips met treklipjes.
-
Stop alsjeblieft nooit met de $@$* zijn, kleefstrips. Nooit.
-
Net als bij de 6 Plus is het verwijderen van de batterij net zo makkelijk als het verwijderen van 3 kleefstrips met treklip. In ieder geval, als je ze er op de juiste wijze uit trekt.
-
De capaciteit van deze batterij is 2750 mAh (10.45 Wh); een milde 165 mAh afname in vergelijking met de batterij van de 6 Plus van vorig jaar.
-
-
-
Voor de tweede keer vandaag trekken we de 12 MP iSight-camera uit zijn inkeping voor een nadere inspectie.
-
Op het eerste gezicht lijkt de iSight-camera van de 6s Plus redelijk op die van de 6s. Echter, als we beide camera's naast elkaar leggen, zien we duidelijk dat de camera van de iPhone 6s Plus een toegevoegd deel aan hardware heeft voor de optische afbeeldingsstabilisatie.
-
-
-
De volgende stap in het proces is het verwijderen van het logic board.
-
Met de skills van een blackjack-dealer, gooien we de
kaartenkabels en de logic boards op tafel. -
We schuiven het logic board uit de behuizing om een betere kijk op de zaak te kunnen krijgen. We houden ervan om veel chips op onze (demontage)tafel te hebben liggen..
-
-
-
Verse fish and chips, rechtstreeks van de BBQ! (Zonder de fish though..)
-
Apple A9 APL1022 SoC + SK Hynix LPDDR4 RAM zoalsn aangegeven met de markeringen H9HKNNNBTUMUMR-NLH (we nemen aan dat het de 2 GB LPDDR4 RAM is, dezelfde als in de iPhone 6s)
-
Qualcomm MDM9635M LTE Cat. 6 modem (vs. de MDM9625M die we in de iPhone 6 vonden)
-
TriQuint TQF6405 stroomversterkingsmodule
-
Skyworks SKY77812 stroomversterkingsmodule
-
Avago AFEM-8030 stroomversterkingsmodule
-
Qualcomm QFE1100 Envelope tracking IC
-
Waarschijnlijk een InvenSense 6-assige gyroscoop en accelerometer combinatie
so iPhone 6S uses Apple A9 APL0898 SoC while iPhone 6S+ uses Apple A9 APL1022 SoC- does that mean those two are different products with different serial numbers?
APL numbers are associated with specific CPU dies within Apple Ax SoCs. These APL numbers are etched on CPU dies.
Apple SoC part number (SKU) is in form of 3xxSxxxx. Different CPU dies within same Apple Ax processor family result in different Apple SoC SKUs.
For example:
- APL0598 is CPU (part) number in Apple A6 SoC 339S0177 (in iPhone 5/5c)
- APL0698 is CPU (part) number in Apple A7 SoC 339S0207 (in iPhone 6s)
---- APL5698 is CPU (part) number in Apple A7 SoC 343S0665 (in iPad Air)
- APL1011 is CPU (part) number in Apple A8 SoC 339S00018 (in iPhone 6/6 Plus)
Thus, from not quite clear A9 SoC photo in iPhone 6S teardown:
- APL0898 is CPU (part) number in Apple A9 SoC 339S00114 (in iPhone 6S)
If APL1022 is marked on Apple A9 SoC SKU here (lack of SoC high resolution image does not allow me to see it) that should mean different processor die on iPhone 6S Plus as well as different A9 SoC SKU compared to A9 SoC in iPhone 6S.
I think you are also missing another Avago chip. You have AFEM-8030, but another site, www.teardowns.com with the teardown of the same Global LTE SKU, has two Avago chips:
1. AFEM8030 2. SFI530.
Are they wrong here?
-
-
-
En hier een bordje Apple-chips aan de achterkant van het logic board:
-
SK Hynix H23QDG8UD1ACS 16 GB NAND Flash
-
Universal Scientific Industrial 339S00043 Wi-Fi-module
-
NXP 66V10 NFC-controller (vs. 65V10 die in de iPhone 6 zit)
-
Apple/Dialog 338S00122 stroommanagement IC
-
Apple/Cirrus Logic 338S00105 Audio IC
-
Qualcomm PMD9635 stroommanagement IC
-
Skyworks SKY77357 stoomversterkingsmodule (waarschijnlijk een versie van de SKY77354)
-
-
-
Murata 240 Front-End module
-
RF Micro Devices RF5150 antenneswitch
-
NXP 1610A3 (waarschijnlijk een verise van de 1610A1 die we in de iPhone 5s en 5c vonden)
-
Apple/Cirrus Logic 338S1285 Audio IC (waarschijnlijk een versie van de 338S1202 audio codec die we in de iPhone 5s vonden)
-
Texas Instruments TPS65730A0Pstroommanagement IC
-
Qualcomm WTR3925 radiofrequentie transceiver
-
Skywokrs SKY13701 cellulair en GPS ontvangst LNA-filtermodule
-
Texas Instrument TI 57A5KXI
-
-
-
Demontage-update!Net als in de iPhone 6s, vinden we ook in deze telefoon nieuwe, kleine siliconen pakkingen die de aansluitingen op het logic board beschermen.
-
Het blijkt dat dit inderdaad de waterdichte siliconen pakkingen zijn waarvoor Apple in maart een patent aanvroeg.
-
Recente tests wezen uit dat de waterdichtheid in de nieuwe iPhone 6s en 6s Plus aanzienlijk verbeterd is. Maar waarom heeft Apple niets over haar nieuwe waterdichtheidsmaatregelen gezegd in de productomschrijving?
-
-
-
Bij het bereiken van de diepste diepten van de 6s Plus, stuiten we op de speaker en zijn kleine vriend, de antenne.
-
Zoals in de 6s vinden we een speaker die erg veel op die in de originele 6 Plus lijkt—een iets aangepaste vorm, maar voor de rest ogenschijnlijk onveranderd.
-
-
-
De iPhone 6s Plus verdient 7 van de 10 punten op onze repareerbaarheidsschaal:
-
De schermmodule is nog steeds het eerste onderdeel dat eruit komt, wat schermreparaties vergemakkelijkt.
-
De batterij is ook makkelijk te bereiken. Het verwijderen van de batterij vereist wel een speciale Pentalobe schroevendraaier en wat kennis van de techniek om de kleefstrips te verwijderen, maar is niet erg moeilijk.
-
De Touch ID-kabel is nog steeds weggestopt, maar is wel uniek verbonden met het logic board, wat reparaties bemoeilijkt.
-
De iPhone 6s Plus maakt nog steeds gebruik van speciale Pentalobe schroeven aan de buitenkant, wat betekent dat je een speciale schroevendraaier nodig hebt om deze te verwijderen.
-
Bu çevirmenlere özel teşekkürler:
95%
Thomas Keulemans dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›
32 Yorum
Shouldn't there be some differences in 14nm(Samsung, GloFo) and 16nm(TSMC) A9 chips (or am I wrong about TSMC technology)? Is it possible to track them?
Performance should be the same (same architecture and transistor count), but because of the smaller node used by Samsung, the A9 produced by them should a little cooler than the TSMC one.
Spotting which one is from TSMC or Samsung could be pretty difficult, since the temperature difference between chips could be less than 1-2 degrees.
Further investigation should be made with a X-ray microscope, the see the real differences between both manufacturers.
"In addition to the 70% faster CPU speed, it's also 90% faster for its GPU performance. The A9 also has the new M9 motion coprocessor that's built into the chip and is now always on."
apple.com
"A9 havs two 1.7GHz cores and two 1.2GHz cores."
forbes.com
Please call out the Invensense chip in the 6s plus. I'd imagine it is the same one as in the 6 phone but please confirm. Also, does Invensense have anything to do with the Optical Image Stabilization feature? Thanks.
I tried the taptic feedback 6S+ in a store and to be frank, it doesn't feel much different then using the old vibrate motors from any other phone. Granted, it does have faster reaction then those that use a spinning weight motor but looking at the old 6 Plus teardown, there really isn't that much of a difference. I mean seriously, go take a look and compare. The shape of the weights is a little different but the underlaying tech is basically the same. I don't see any reason why "3D touch" can't be incorporated on the old 6 Plus (other then to get people to buy the new phone). The hardware required for 3D touch (touchscreen + shaftless vibrator) is all available on the 6 Plus. The rest is simply software. Now you might say the 6S senses pressure but it really does not (please correct me with proof if I'm wrong). It doesn't have an actual pressure sensor like the macbooks. The screen (I believe) is using the size of your touch to determine pressure, not actual pressure.
As far as I know the 6S uses newly added capacitive sensors to measure the distance between display glass and backlight.
Thats why the 6S is a few grams heavier.
Look from Min 2:10 in the video "The Innovation behind 3D Touch":
Step 7: I think it's worh noting that while the 6S Plus's Taptic component is much shorter than the 6S's, it's volumetricly not much smaller. The 6S Plus's comes in at 588 mm³ while the 6S's is 672 mm³— just 14% larger.
Doing some back-of-the-enveloper math and shaving off 0.5 mm each dimension thats 478.5 mm³ for the 6S Plus and 512.325 mm³ for the 6S— 7% larger.
A teardown of the Taptic component could reveal that the internals in the 6S Plus's are the same size or even a hair larger. I'd like to see that teardown.
Where can i buy that fancy new ifixit screw driver? stop holding out!
I'm wondering if the battery is the same dimensions as the 6 Plus because to be honest it seems like it does when I look at my 6 Plus without it's screen... If it is would it be possible to put a 6 Plus battery in the 6S Plus for the capacity?
Hynix E3NAND 16GB (128Gbit) partnumber should be H23QDG8UD1ACS not H230DG8UD1ACS (4th Letter is "Q" instead of "0"), but it's hard to read on the chip. BR Lars
i wonna iPhone 5
What is NB 30 mean for iPhone 6splus gold 128GB, it was written on repair service sheet. NB30?
I'm with you Lim, I haven't a clue what NB30 has to do with the iPhone 6s. However I do know that The NB in NB30 stands for NetBook. Chime in anyone
Does anyone know where the back microphone is located and is it replaceable.. Or do I need go change the main logic board in my iPhone 6S
@dfallen The rear mic is attached to the power button flex cable. You can find instructions for replacing it here.
There is a peice of rubber spacer/insulator fell off when I took the 6S plus apart. It looks exactly like the two used on the mounting ears for the Pentalobe screws that hold the iPhone together. However, I could not locate where this third piece of rubber spacer/insulator came from. Any idea?
William
my iphone keeps detecting that theres soemthing in the headphone jack but theres nothing connected. can i just like desolder the headphonejack out o the assemply and the iphone will think that its still there or will it detect that its missing and shut down until apple itself repairs it?
ya desarme pero no me acuerdo los tornillo en donde van ya que son de diferente tamaño