Ana içeriğe geç

Giriş

Many have said it is difficult to fix a charge port for a few reasons:

Tiny pins.

Lack of tools

Destroying pads

Here is a step by step that should work with most devices to help make the job easier.

  1. Disassemble to get to motherboard of device, wrap with kapton tape to avoid damaging any other components. Take heatgun and heat old port Disassemble to get to motherboard of device, wrap with kapton tape to avoid damaging any other components. Take heatgun and heat old port Disassemble to get to motherboard of device, wrap with kapton tape to avoid damaging any other components. Take heatgun and heat old port
    • Disassemble to get to motherboard of device, wrap with kapton tape to avoid damaging any other components. Take heatgun and heat old port

Sonuç

To reassemble your device, follow these instructions in reverse order.

40 farklı kişi bu kılavuzu tamamladı.

Johnnyfixit

Üyelik tarihi: 04-09-2014

1.329 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 1,458