Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement - iFixit Tamir Kılavuzu

Giriş

By the end of they guide you will have adjusted the height of the device

Neye ihtiyacın var

Adım 1 Unplug

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement, Unplug: adım 1, 1 resimden 1.

Before you begin, remember to disconnect the mains plug.

Adım 2

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 2, 2 resimden 1.

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 2, 2 resimden 2.

Remove the dust extraction nozzle, blade and edge guide.
Refer to the instructions for the device to remove them.

Adım 3

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 3, 1 resimden 1.

Open wide to free up space for a better work area.

Adım 4

Using a large pat screwdriver, remove the small pin.

Adım 5

Then remove the black rod.

Adım 6

And finally unscrew the nut.

Adım 7

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 7, 1 resimden 1.

Here is the order of the parts to remove.

Adım 8

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 8, 2 resimden 1.

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 8, 2 resimden 2.

Then we replace the height adjustment.

Adım 9

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 9, 2 resimden 1.

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 9, 2 resimden 2.

Finally put each piece back in order.
To tighten, simply replace the tray at the bottom and hand tighten the nut.
With the lever, take the nut and put it in the locked position without effort
It should be tight but not touching the board.

Adım 10

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 10, 2 resimden 1.

Dexter Corded Circular Saw - 1300CIS2-185.5 Height Adjustment Replacement: adım 10, 2 resimden 2.

Replace the blade, edge guide, and extraction bit on the saw.

Sonuç

to reassemble perform the steps in reverse order.

Bu çevirmenlere özel teşekkürler:

fr en

100%

HelloMacOS

HelloMacOS dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Yazar

1 tane daha katılımcı ile

Céline Chemineau

Üyelik tarihi: 01/29/20

16.497 İtibar

95 adet Kılavuz yazıldı

+8 tane daha rozet

Ekip

Leroy Merlin Leroy Merlin üyesi

Community

36 Üyeler

239 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 25

Her zaman: 1,053