Eşyalarını Tamir Et Topluluk Mağaza

Digital Calipers Battery Replacement

Giriş

Use this guide to replace the battery in iFixit digital calipers.

Note: iFixit digital calipers come with two SR44 (also called LR44, AG13, or SG13) button cell batteries.

Neye ihtiyacın var

  1. Digital Calipers Battery Replacement, Remove the battery cover: adım 1, 3 resimden 1. Digital Calipers Battery Replacement, Remove the battery cover: adım 1, 3 resimden 2. Digital Calipers Battery Replacement, Remove the battery cover: adım 1, 3 resimden 3.

    • Use the pad of your thumb to slide the battery cover away from the display.

    • Remove the battery cover.

    Düzenle

  2. Digital Calipers Battery Replacement, Remove the battery: adım 2, 2 resimden 1. Digital Calipers Battery Replacement, Remove the battery: adım 2, 2 resimden 2.

    • Remove the battery.

    Düzenle

  4. Digital Calipers Battery Replacement, Install a new battery: adım 3, 3 resimden 1. Digital Calipers Battery Replacement, Install a new battery: adım 3, 3 resimden 2. Digital Calipers Battery Replacement, Install a new battery: adım 3, 3 resimden 3.

    • Insert the new battery at a downward angle into its recess, positive (+) side facing up.

    • A small piece of angled metal secures the battery in its recess.

    • Press down on the battery so it sits flush in the recess.

    • The display should turn on. If it doesn't, even after pressing the on/off button, the battery may be upside down or already dead.

    Düzenle

  5. Digital Calipers Battery Replacement, Reinstall the battery cover: adım 4, 3 resimden 1. Digital Calipers Battery Replacement, Reinstall the battery cover: adım 4, 3 resimden 2. Digital Calipers Battery Replacement, Reinstall the battery cover: adım 4, 3 resimden 3.

    • Press the outer edge of the battery down with the cover and slide the cover into place.

    • If this feels difficult, the battery may not be seated correctly. Reinsert it and try again.

    Düzenle
Sonuç

For more information on how to use digital calipers, follow this guide.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our answers community for help.

For other general electronics skills guides, click here.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Spencer Day

Üyelik tarihi: 09/14/22

55.203 İtibar

408 adet Kılavuz yazıldı

Rozetler: 34

+31 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

17.430 adet Kılavuz yazıldı

Bir Yorum

hi i am looking to replace my battery cover for my vernier ams32 any ideas

Robert Wales - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 32

Son 7 gün: 225

Son 30 gün: 1,026

Her zaman: 11,134