Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Digital2 D2-912 Screen Replacement

Neye ihtiyacın var

    1. Digital2 D2-912 Screen Replacement, External Cover: adım 1, 1 resimden 1.
      • Remove the two Phillips #00 screws from the bottom of the case.

      FixBot'a Sor

      Yorum Ekle

    2. Digital2 D2-912 Screen Replacement: adım 2, 2 resimden 1. Digital2 D2-912 Screen Replacement: adım 2, 2 resimden 2.
      • Wedge the opening tool in the space between the back and the front of the tablet.

      • Carefully work your way around the perimeter, wedging the opening tool between the front and back of the tablet.

      • When the back of the tablet is mostly detached from the front, carefully pull it away completely.

      FixBot'a Sor

      Yorum Ekle

    1. Digital2 D2-912 Screen Replacement, Screen: adım 3, 1 resimden 1.
      • Be sure to remove the yellow tape that is holding the components down.

      • Locate the two yellow ribbon cables and carefully remove by lifting the black tab connectors forward and slide out ribbon.

      • When all components are unsecured, you will be able to remove the battery, motherboard, camera, and speaker out of the way.

      FixBot'a Sor

      Yorum Ekle

    2. Digital2 D2-912 Screen Replacement: adım 4, 1 resimden 1.
      • Using the metal spudger, pry the display from the screen.

      FixBot'a Sor

      Yorum Ekle

    3. Digital2 D2-912 Screen Replacement: adım 5, 1 resimden 1.
      • The screen is now ready to be replaced by the new one

      FixBot'a Sor

      Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

İptal et: Bu kılavuzu tamamlamadım.

Lindsay Richardson

Üyelik tarihi: 09/16/15

394 İtibar

3 adet Kılavuz yazıldı

Ekip

IUPUI, Team 1-1, Harley Fall 2015 IUPUI, Team 1-1, Harley Fall 2015 üyesi

IUPUI-HARLEY-F15S1G1

4 Üyeler

6 adet Kılavuz yazıldı

3Kılavuz Yorumları

Dear Lindsay,

thank you for the guide how to open up that little thing!

Apparently I have fried it after I had mislaid the charger and used my

universal charger without checking the voltage: 8 instead of 5... If only

I had used my reading glasses.

Is there something like a fuse that I could repair/exchange?

Thank you for your help!

Respectfully,

Wolfgang

Dr. Wolfgang Mohr - Yanıt Paylaş

Thanks for the help, I am just curious where I can get the new screen, I believe that the front glass is fine but the actual display I am pretty sure is not.

Super Manny - Yanıt Paylaş

This website right here. Straight trash,basically So you have a broken tablet. You come to the website to get help to replace it. And it's no help at all. This is what I think about this hot mass right here

Rocia Patrick - Yanıt Paylaş

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 19

Her zaman: 952