Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

We are going to teach you how to remove the external cover on the Digital2 Platinum Pad 9 tablet. Getting the cover off is a little tricky and takes a bit of force.

Parçalar

Hiçbir parça belirtilmedi.

  1. Take the plastic opening tool and insert it into the crease between the screen and the plastic casing and press down.
    • Take the plastic opening tool and insert it into the crease between the screen and the plastic casing and press down.

  2. After inserting the plastic opening tool, run it around the device a few times to loosen the external cover. After inserting the plastic opening tool, run it around the device a few times to loosen the external cover.
    • After inserting the plastic opening tool, run it around the device a few times to loosen the external cover.

  3. Once you've gone around a few times a corner will pop up, insert the opening tool there and repeat step 2 with slightly more pressure. Do this until every section of the backing has popped up. Then just remove the backing.
    • Once you've gone around a few times a corner will pop up, insert the opening tool there and repeat step 2 with slightly more pressure. Do this until every section of the backing has popped up.

    • Then just remove the backing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

David DeMeritt

Üyelik tarihi: 08-03-2016

613 İtibar

6 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 5-6, Landers Spring 2016 UMass Dartmouth, Team 5-6, Landers Spring 2016 üyesi

UMASSD-LANDERS-S16S5G6

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 197