Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Disassembling Canon EOS Rebel XS Front Cover

Neye ihtiyacın var

  1. Disassembling Canon EOS Rebel XS Front Cover, Latch Side Cover: adım 1, 1 resimden 1.
    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

  2. Disassembling Canon EOS Rebel XS Front Cover: adım 2, 1 resimden 1.
    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

  3. Disassembling Canon EOS Rebel XS Front Cover, Disassembling Canon EOS Rebel XS Front Cover: adım 3, 1 resimden 1.
    • Remove three medium length screws from the bottom of the camera

  4. Disassembling Canon EOS Rebel XS Front Cover: adım 4, 1 resimden 1.
    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Daniel Bussone

Üyelik tarihi: 01/28/11

1.251 İtibar

11 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011 üyesi

CPSU-REGAN-W11S3G41

2 Üyeler

21 adet Kılavuz yazıldı

2 Yorum

This should be labelled: Easy.

tjt263 - Yanıt

Okay, there are several steps missing.

tjt263 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 10

Her zaman: 5,255