Eşyalarını Tamir Et Topluluk Mağaza

Disassembling Canon PowerShot SD1100 IS Front and Rear Cover

Giriş

Use this guide to remove the front and rear cover of the Canon PowerShot SD1100 IS.

Neye ihtiyacın var

  1. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover, Front and Rear Cover: adım 1, 2 resimden 1. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover, Front and Rear Cover: adım 1, 2 resimden 2.

    • Remove wrist strap and battery.

    Düzenle

  2. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: adım 2, 3 resimden 1. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: adım 2, 3 resimden 2. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: adım 2, 3 resimden 3.

    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

    Düzenle

  4. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: adım 3, 3 resimden 1. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: adım 3, 3 resimden 2. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: adım 3, 3 resimden 3.

    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

    Düzenle

  5. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: adım 4, 1 resimden 1.

    • The cases should now be removed.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Tyler Grossheim

Üyelik tarihi: 01/25/11

1.470 İtibar

6 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

Cal Poly, Team 3-32, Regan Winter 2011 Cal Poly, Team 3-32, Regan Winter 2011 üyesi

CPSU-REGAN-W11S3G32

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 6

Her zaman: 3,397