Ana içeriğe geç

Canon Powershot SD880 LCD Display Replacement

Neye ihtiyacın var

  1. Canon Powershot SD880 LCD Display Replacement, Back Cover: adım 1, 3 resimden 1. Canon Powershot SD880 LCD Display Replacement, Back Cover: adım 1, 3 resimden 2. Canon Powershot SD880 LCD Display Replacement, Back Cover: adım 1, 3 resimden 3.
    • Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

    • Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

    • One screw will be located under the rubber USB flap.

    • Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Slowly pull the back cover off of the camera.

  2. Canon Powershot SD880 LCD Display Replacement, LCD Display: adım 2, 3 resimden 1. Canon Powershot SD880 LCD Display Replacement, LCD Display: adım 2, 3 resimden 2. Canon Powershot SD880 LCD Display Replacement, LCD Display: adım 2, 3 resimden 3.
    • Remove the two 2.9 mm screws at the top-right corner and bottom-left corner of the LCD screen using a Phillips #0 screwdriver.

    • Disconnect the ribbons that connect the screen to the camera.

    • Lift the screen off.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ben Tupas

Üyelik tarihi: 01/13/11

317 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 13-3, Forte Winter 2011 Cal Poly, Team 13-3, Forte Winter 2011 üyesi

CPSU-FORTE-W11S13G3

5 Üyeler

8 adet Kılavuz yazıldı

Bir Yorum

Hm. "Disconnect the ribbons" resulted in a torn ribbon, and so a dead camera, I think. This also doesn't say how to take the LCD screen out of its frame. Alas.

Maelduin - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 2,301