Giriş

This is a disassembly guide for the face of the clock, useful in the case that the face requires: maintenance, replacement, or access to the interior parts.

Parçalar

Hiçbir parçaya gerek yok.

Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.
  • Grasp the plastic cover and carefully pull straight back so that the clock cover dislodges from its housing.

  • If any additional assistance is required for this step, it is recommended to use the plastic opening tool to help pry the edges of the cover simultaneously or a suction cup if you cannot grip the rim.

Yorum Ekle

Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.
  • Using your fingers, grasp the point where the hands of the clock meet in the center and pull straight back until they dislodge from the motor.

  • Be sure that you remove all three hands as well as the pin that connects them in this one step. This component should come out as a single piece.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Devin Gooding

Üyelik tarihi: 20-01-2015

104 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team 19-1, Blackwell Winter 2015 USF Tampa, Team 19-1, Blackwell Winter 2015 üyesi

USFT-BLACKWELL-W15S19G1

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 212