Eşyalarını Tamir Et Topluluk Mağaza

Disassembling Coby Kyros MID9742 Outer Casing

Giriş

This process is simple and when completed will allow the user to service the components that are located in the interior of the tablet.

Neye ihtiyacın var

  1. Disassembling Coby Kyros MID9742 Outer Casing, Outer Casing: adım 1, 1 resimden 1.

    • Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.

    Düzenle

  3. Disassembling Coby Kyros MID9742 Outer Casing: adım 2, 1 resimden 1.

    • Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.

    Düzenle

  4. Disassembling Coby Kyros MID9742 Outer Casing: adım 3, 1 resimden 1.

    • Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.

    • Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.

    • Use caution while prying, do not stick the metal spudger in too far as it may damage internal components

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Ian Swett

Üyelik tarihi: 03/11/15

597 İtibar

5 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

Colorado Springs, Team 5-3, Panko Spring 2015 Colorado Springs, Team 5-3, Panko Spring 2015 üyesi

UCCS-PANKO-S15S5G3

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 6

Son 30 gün: 8

Her zaman: 473