Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Disassembling Compaq Mini 110 Display Assembly

Neye ihtiyacın var

  1. Disassembling Compaq Mini 110 Display Assembly, Battery: adım 1, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly, Battery: adım 1, 2 resimden 2.
    • Locate the battery and the battery tabs on the bottom of the Compaq Mini.

  2. Disassembling Compaq Mini 110 Display Assembly: adım 2, 3 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 2, 3 resimden 2. Disassembling Compaq Mini 110 Display Assembly: adım 2, 3 resimden 3.
    • Push both tabs inward simultaneously and slide the battery out.

  3. Disassembling Compaq Mini 110 Display Assembly, RAM: adım 3, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly, RAM: adım 3, 2 resimden 2.
    • Use a Philips #0 screwdriver to unscrew the two screws covering the memory compartment on the bottom of the laptop and remove the cover.

  4. Disassembling Compaq Mini 110 Display Assembly: adım 4, 1 resimden 1.
    • Push out the side tabs simultaneously and pull out the old RAM module.

    • When inserting a new RAM stick, be sure to evenly insert the gold pins in the same orientation that the old module was removed. While sliding the module in, press the side tabs in place.

  5. Disassembling Compaq Mini 110 Display Assembly, Keyboard: adım 5, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly, Keyboard: adım 5, 2 resimden 2.
    • Remove the rubber pads located on the corners of your Compaq Mini.

    • There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

  6. Disassembling Compaq Mini 110 Display Assembly: adım 6, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 6, 2 resimden 2.
    • Unscrew all the corner screws. There are four total, one under each rubber pad.

  7. Disassembling Compaq Mini 110 Display Assembly: adım 7, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 7, 2 resimden 2.
    • Unscrew the screw for the bottom case located in the RAM compartment.

  8. Disassembling Compaq Mini 110 Display Assembly: adım 8, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 8, 2 resimden 2.
    • Remove the three screws in the silver tabs at the back of the keyboard.

    • These are located at the back of the base under the screen.

    • Lift the keyboard away from the laptop.

  9. Disassembling Compaq Mini 110 Display Assembly, Hard Drive: adım 9, 1 resimden 1.
    • Remove the three screws holding the panel in place.

  10. Disassembling Compaq Mini 110 Display Assembly: adım 10, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 10, 2 resimden 2.
    • Pull up on the tab to remove the hard drive.

  11. Disassembling Compaq Mini 110 Display Assembly, Top Cover: adım 11, 1 resimden 1.
    • Remove the eight screws that are from the plastic top cover.

  12. Disassembling Compaq Mini 110 Display Assembly: adım 12, 3 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 12, 3 resimden 2. Disassembling Compaq Mini 110 Display Assembly: adım 12, 3 resimden 3.
    • Pry up the top plastic cover using a spudger.

    • These two tabs under the screen need to be pushed in with a spudger.

  13. Disassembling Compaq Mini 110 Display Assembly: adım 13, 2 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 13, 2 resimden 2.
    • Remove the cable by carefully pulling it up.

    • Be careful when lifting up the cover because the track pad is still attached.

  14. Disassembling Compaq Mini 110 Display Assembly, Display Assembly: adım 14, 3 resimden 1. Disassembling Compaq Mini 110 Display Assembly, Display Assembly: adım 14, 3 resimden 2. Disassembling Compaq Mini 110 Display Assembly, Display Assembly: adım 14, 3 resimden 3.
    • Take out the four screws that keep the bottom of the hinges attached to the base.

  15. Disassembling Compaq Mini 110 Display Assembly: adım 15, 3 resimden 1. Disassembling Compaq Mini 110 Display Assembly: adım 15, 3 resimden 2. Disassembling Compaq Mini 110 Display Assembly: adım 15, 3 resimden 3.
    • Pry off the top plastic cover of the display assembly.

    • Note: There is adhesive tape holding the cover on.

    • Note: The spudger may go all the way through to the screen-side of the cover. This is ok and will not damage anything.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

alea

Üyelik tarihi: 10/06/10

1.405 İtibar

14 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 22-2, Maness Fall 2010 Cal Poly, Team 22-2, Maness Fall 2010 üyesi

CPSU-MANESS-F10S22G2

6 Üyeler

20 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 7,360