Ana içeriğe geç

What you need

  1. Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case, Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case: adım 1, 1 resimden 1.
    • Unplug the toaster from the electrical outlet.

  2. Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case: adım 2, 2 resimden 1. Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case: adım 2, 2 resimden 2.
    • Remove the two levers and four dials by pulling them out directly towards you.

    • Removing these components may require some force, but they will release.

  3. Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case: adım 3, 1 resimden 1.
    • Look for the plastic clips on the back side of the toaster.

    • Disconnect the small plastic clips on the back of the toaster. Use Philips head Screwdriver to do this step.

    • Now, carefully remove the toaster casing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ron Gajdos

Üyelik tarihi: 16-10-2013

307 İtibar

3 adet Kılavuz yazıldı

Team

UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013 UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013 üyesi

UMASSD-VIJAYBHASKAR-F13S4G4

3 Üyeler

4 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 963