Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Disassembling Griffin iFM 4027 Central Button

Neye ihtiyacın var

  1. Disassembling Griffin iFM 4027 Central Button, Right Side Panel: adım 1, 1 resimden 1.
    Bu adımda kullanılan alet:
    iFixit Opening Tool
    $1.99
    Satın Al
    • First, lodge the tip of the plastic iFixit opening tool into the top corner of the device.

    • Apply pressure upward with the iFixit Opening Tool. This should release the two panels away from each other.

  2. Disassembling Griffin iFM 4027 Central Button: adım 2, 3 resimden 1. Disassembling Griffin iFM 4027 Central Button: adım 2, 3 resimden 2. Disassembling Griffin iFM 4027 Central Button: adım 2, 3 resimden 3.
    • Use your fingers to separate the right side panel from the device.

    • Turn the panel over so that the outer edge is facing downward.

    • Use your fingers to dislodge the buttons, and then set them aside for later.

  3. Disassembling Griffin iFM 4027 Central Button, Left Side Panel: adım 3, 1 resimden 1.
    • Lodge the tip of the plastic opening tool into the top arc where the side and main part of the device meet.

    • Push the plastic opening tool upward until the side panel detaches.

  4. Disassembling Griffin iFM 4027 Central Button: adım 4, 3 resimden 1. Disassembling Griffin iFM 4027 Central Button: adım 4, 3 resimden 2. Disassembling Griffin iFM 4027 Central Button: adım 4, 3 resimden 3.
    • Slide the plastic opening tool along the panel seam and push upward until the side panel detaches from the main device.

    • Turn over the detached side panel, so that the outer side is facing downward.

    • Then use your fingers to disassemble the panel button and set it off to the side.

  5. Disassembling Griffin iFM 4027 Central Button, Central Button: adım 5, 2 resimden 1. Disassembling Griffin iFM 4027 Central Button, Central Button: adım 5, 2 resimden 2.
    • The central button can easily be removed by using your fingers or tweezers to push the button out towards the left panel.

Sonuç

After disassembly, the device components should look similar to that which is depicted in the cover image (top right of page).

Alexander

Üyelik tarihi: 03/09/12

101 İtibar

6 adet Kılavuz yazıldı

Ekip

Clemson, Team 15-3, Benson Spring 2012 Clemson, Team 15-3, Benson Spring 2012 üyesi

CLEM-BENSON-S12S15G3

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 1,044