Ana içeriğe geç

Giriş

There are no prerequisites required for this disassembly, but a spudger or similar opening tool is required to remove the panel.

Parçalar

Hiçbir parça belirtilmedi.

  1. Lodge the tip of the plastic opening tool into the top arc of the front panel.
    • Lodge the tip of the plastic opening tool into the top arc of the front panel.

    • Push the plastic opening tool upward until the side panel detaches.

  2. Slide the plastic opening tool along the panel seam and push upward until the side panel is fully detached. Turn the detached side panel over so that the outer side is facing downward. Use your fingers to detach the panel button and set it aside.
    • Slide the plastic opening tool along the panel seam and push upward until the side panel is fully detached.

    • Turn the detached side panel over so that the outer side is facing downward.

    • Use your fingers to detach the panel button and set it aside.

Sonuç

After disassembly, the device components should look similar to that which is depicted in the cover image (top right of page).

Alexander

Üyelik tarihi: 09-03-2012

101 İtibar

9 adet Kılavuz yazıldı

Takım

Clemson, Team 15-3, Benson Spring 2012 Clemson, Team 15-3, Benson Spring 2012 üyesi

CLEM-BENSON-S12S15G3

3 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 1,073