Giriş

These instructions will demonstrate how to remove the back plate from the KDDI Kyocera A5521K.

Parçalar

Hiçbir parçaya gerek yok.

Turn the phone over to expose the battery cover.
  • Turn the phone over to expose the battery cover.

  • Apply pressure to the back of the battery cover to slide it down.

  • The battery cover is now separate from the phone.

Yorum Ekle

Remove the battery by pushing it up and out from the bottom.
  • Remove the battery by pushing it up and out from the bottom.

  • The battery, cover, and phone should now be separated.

Yorum Ekle

  • Remove the four screws with the Y0 screwdriver.

Yorum Ekle

  • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

  • Remove the two screws with a Y0 screwdriver.

Yorum Ekle

  • Rotate the phone 180 degrees.

  • Carefully separate the back plate from the remainder of the phone.

  • The back plate should now be detached from the rest of the phone.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Dominic Grisafe

Üyelik tarihi: 15-04-2010

133 İtibar

10 adet Kılavuz yazıldı

Takım

Cal Poly, Team 28-25, Regan Spring 2010 Cal Poly, Team 28-25, Regan Spring 2010 üyesi

CPSU-REGAN-S10S28G25

4 Üyeler

20 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 2,658