Giriş

These instructions will demonstrate how to remove the main LCD screen from the KDDI Kyocera A5521K.

Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone. Beneath the covers are screws. Beneath the covers are screws.
  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

Yorum Ekle

Remove the screws using a Y0 screwdriver.
  • Remove the screws using a Y0 screwdriver.

Yorum Ekle

Use the iPod pry tool to remove the outer screen. Two screws are now visible. Be careful not to crack the screen upon removal.  It is adhered strongly to the phone.
  • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

Yorum Ekle

Use the Y0 screwdriver to remove the screws.
  • Use the Y0 screwdriver to remove the screws.

Yorum Ekle

Use the iPod pry tool to loosen the faceplate from the phone. Slide the pry tool along the entire crease of the faceplate to completely detach it.
  • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

Yorum Ekle

Separate the faceplate from the phone. Separate the faceplate from the phone. Separate the faceplate from the phone.
  • Separate the faceplate from the phone.

Yorum Ekle

Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip). Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip).
  • Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip).

Yorum Ekle

Carefully pry up the camera unit with a spudger. Be careful not to damage the camera unit. The camera should now be separated from the phone.
  • Carefully pry up the camera unit with a spudger.

    • Be careful not to damage the camera unit.

    • The camera should now be separated from the phone.

Yorum Ekle

Remove the flexible circuit shown using tweezers (or use your fingers if you can manage a firm grip). Remove the flexible circuit shown using tweezers (or use your fingers if you can manage a firm grip).
  • Remove the flexible circuit shown using tweezers (or use your fingers if you can manage a firm grip).

Yorum Ekle

Unplug the circuit connector. Unplug the circuit connector.
  • Unplug the circuit connector.

Yorum Ekle

Grab the phone with both hands. Turnover the phone so that the main screen faces you. Firmly grasp the edges between your thumbs and fingers.
  • Grab the phone with both hands.

  • Turnover the phone so that the main screen faces you.

  • Firmly grasp the edges between your thumbs and fingers.

  • Carefully push in the LCD screen from the remainder of the phone.

    • Be careful not to break the LCD screen.

Yorum Ekle

The LCD screen and circuit board should now be partly detached from the frame. The LCD screen and circuit board should now be partly detached from the frame.
  • The LCD screen and circuit board should now be partly detached from the frame.

Yorum Ekle

Turn over the phone. Separate the circuit board from the back of the LCD screen.
  • Turn over the phone.

  • Separate the circuit board from the back of the LCD screen.

Yorum Ekle

Remove the LCD screen from the phone. Remove the LCD screen from the phone. Remove the LCD screen from the phone.
  • Remove the LCD screen from the phone.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Üyelik tarihi: 15-04-2010

133 İtibar

20 adet Kılavuz yazıldı

Takım

Cal Poly, Team 28-25, Regan Spring 2010 Cal Poly, Team 28-25, Regan Spring 2010 üyesi

CPSU-REGAN-S10S28G25

4 Üyeler

20 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 1,523