Parçalar

Hiçbir parçaya gerek yok.

  1. First be sure to turn the power switch to the off position.
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

    Yorum Ekle

  2. Now remove the battery.
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

    Yorum Ekle

    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

    Yorum Ekle

    • Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.

    Yorum Ekle

    • Remove the 7/16" phillips head screw.

    Yorum Ekle

    • Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

MacKinley

Üyelik tarihi: 22-10-2013

651 İtibar

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 5

Son 30 Gün: 21

Her zaman: 1,058