Giriş

Disassembling top half to get to connector ribbon, inside screen, and speaker.

  1. Pull at top of faceplate, and it will pop off.
    • Pull at top of faceplate, and it will pop off.

    Yorum Ekle

  2. Unscrew four screws on front cover.
    • Unscrew four screws on front cover.

    Yorum Ekle

    • Slide out metallic silver cover.

    • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

    Yorum Ekle

    • Use a tool to wedge in between the silver and black parts on the cover.

    • Silver part should now snap off.

    Yorum Ekle

    • Black rubber part may now be easily removed.

    Yorum Ekle

    • Use a soldering iron to disconnect the connector ribbon from the phone.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

Üyelik tarihi: 07-05-2010

1 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 6-16, Maness Spring 2010 Cal Poly, Team 6-16, Maness Spring 2010 üyesi

CPSU-MANESS-S10S6G16

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 2,517