Giriş

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

Slide the notch downward while pulling the back cover off to remove it.
  • Slide the notch downward while pulling the back cover off to remove it.

Yorum Ekle

Use your fingers to push the battery upward from the bottom.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

Yorum Ekle

  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

Yorum Ekle

  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

Yorum Ekle

  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

Yorum Ekle

  • Carefully pry off the connection between the headphone jack and logic board.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Üyelik tarihi: 14-04-2010

7 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 29-61, Johann Spring 2010 Cal Poly, Team 29-61, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S29G61

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,241