Giriş

Today we are going to take you to a step by step guide on how to install a new keypad.

Slide the notch downward while pulling the back cover off to remove it. Slide the notch downward while pulling the back cover off to remove it. Slide the notch downward while pulling the back cover off to remove it.
  • Slide the notch downward while pulling the back cover off to remove it.

Yorum Ekle

Use your fingers to push the battery upward from the bottom. Lift upwards to remove the battery. Lift upwards to remove the battery.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

Yorum Ekle

Unscrew the antenna in a counter-clockwise fashion. Remove the aluminum cover.
  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

Yorum Ekle

Unscrew the 3 screws shown. Lift up the right part of the Nextel logo and unscrew the screw underneath. Lift up the right part of the Nextel logo and unscrew the screw underneath.
  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

Yorum Ekle

DO NOT force the cover off as it could damage the ribbon cable! Gently lift the back cover off.
  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

Yorum Ekle

Carefully pry off the connection between the headphone jack and logic board. Carefully pry off the connection between the headphone jack and logic board. Carefully pry off the connection between the headphone jack and logic board.
  • Carefully pry off the connection between the headphone jack and logic board.

Yorum Ekle

Lift the first logic board off of the rest of the device. Lift the first logic board off of the rest of the device.
  • Lift the first logic board off of the rest of the device.

Yorum Ekle

Gently lift the second logic board from the rest of the device.
  • Gently lift the second logic board from the rest of the device.

  • DO NOT force the board straight off as it could damage the ribbon cable!

Yorum Ekle

Using tweezers, carefully pull off the connector shown. Using tweezers, carefully pull off the connector shown.
  • Using tweezers, carefully pull off the connector shown.

Yorum Ekle

Remove the keypad buttons off the front cover of the phone. Remove the keypad buttons off the front cover of the phone. Remove the keypad buttons off the front cover of the phone.
  • Remove the keypad buttons off the front cover of the phone.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jorge

Üyelik tarihi: 14-04-2010

4 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 29-61, Johann Spring 2010 Cal Poly, Team 29-61, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S29G61

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,315