Giriş

This guide details how to remove the logic board.

Slide the notch downward while pulling the back cover off to remove it.
  • Slide the notch downward while pulling the back cover off to remove it.

Yorum Ekle

Use your fingers to push the battery upward from the bottom.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

Yorum Ekle

  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

Yorum Ekle

  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

Yorum Ekle

  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

Yorum Ekle

  • Carefully pry off the connection between the headphone jack and logic board.

Yorum Ekle

  • Lift the first logic board off of the rest of the device.

Yorum Ekle

  • Gently lift the second logic board from the rest of the device.

  • DO NOT force the board straight off as it could damage the ribbon cable!

Yorum Ekle

  • Using tweezers, carefully pull off the connector shown.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Üyelik tarihi: 14-04-2010

7 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 29-61, Johann Spring 2010 Cal Poly, Team 29-61, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S29G61

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 892