Eşyalarını Tamir Et Topluluğa Katılın Mağaza

Disassembling NEC LCD1770NX Monitor Enclosure

What you need

  1. Disassembling NEC LCD1770NX Monitor Enclosure, Stand: adım 1, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure, Stand: adım 1, 2 resimden 2.

    • Place the monitor face down on a clean, flat surface.

    Düzenle

  2. Disassembling NEC LCD1770NX Monitor Enclosure: adım 2, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 2, 2 resimden 2.

    • Firmly remove the back panel of the stand by pulling it up and away from the monitor.

    Düzenle

  3. Disassembling NEC LCD1770NX Monitor Enclosure: adım 3, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 3, 2 resimden 2.

    • Unscrew the two 6mm Phillips PH2 screws to detach the stand enclosure from the stand.

    Düzenle

  4. Disassembling NEC LCD1770NX Monitor Enclosure: adım 4, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 4, 2 resimden 2.

    • Firmly grasp the stand enclosure with your hand and slide it to base of stand.

    Düzenle

  5. Disassembling NEC LCD1770NX Monitor Enclosure: adım 5, 1 resimden 1.

    • Unscrew the two 14.5mm Phillips PH2 screws holding the stand to the monitor.

    Düzenle

  7. Disassembling NEC LCD1770NX Monitor Enclosure: adım 6, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 6, 2 resimden 2.

    • Lift the the stand straight up to remove it.

    Düzenle

  8. Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: adım 7, 3 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: adım 7, 3 resimden 2. Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: adım 7, 3 resimden 3.

    • Place the monitor screen face up.

    • Pull the frame off by placing your fingers on the inside of the frame and pulling out and up, the frame should snap off.

    • Continue your way around the screen.

    Düzenle

  9. Disassembling NEC LCD1770NX Monitor Enclosure: adım 8, 3 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 8, 3 resimden 2. Disassembling NEC LCD1770NX Monitor Enclosure: adım 8, 3 resimden 3.

    • Unscrew the two 7mm screws from the bottom of the button assembly.

    • Do not pull the button assembly out too quickly or with too much force! Damage to the wires can occur.

    • Pull the button assembly out a few inches and unplug the colored cables.

    Düzenle

  10. Disassembling NEC LCD1770NX Monitor Enclosure: adım 9, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 9, 2 resimden 2.

    • Unscrew the gold colored 7mm Phillips PH000 screw holding the button assembly to the monitor.

    • Remove the button assembly from the monitor.

    Düzenle

  11. Disassembling NEC LCD1770NX Monitor Enclosure: adım 10, 1 resimden 1.

    • With the monitor face-down, unscrew the 5 7mm Phillips PH2 screws around the outside of the enclosure.

    Düzenle

  12. Disassembling NEC LCD1770NX Monitor Enclosure: adım 11, 3 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 11, 3 resimden 2. Disassembling NEC LCD1770NX Monitor Enclosure: adım 11, 3 resimden 3.

    • Unscrew the 2 14.5mm Phillips PH2 screws located on the raised center of the enclosure.

    • Carefully pull the enclosure off the monitor.

    Düzenle

  13. Disassembling NEC LCD1770NX Monitor Enclosure: adım 12, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 12, 2 resimden 2.

    • Unscrew the 10 5mm Philips PH2 screws holding the metal casing to the monitor.

    Düzenle

  14. Disassembling NEC LCD1770NX Monitor Enclosure: adım 13, 2 resimden 1. Disassembling NEC LCD1770NX Monitor Enclosure: adım 13, 2 resimden 2.

    • Pull the the metal casing off of the monitor to reveal the motherboards.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

7 tane daha katılımcı ile

John Patterson

Üyelik tarihi: 10/19/13

253 İtibar

2 adet Kılavuz yazıldı

Badges: 9

+6 tane daha rozet

Team

Cal Poly, Team 11-36, Amido Fall 2013 Cal Poly, Team 11-36, Amido Fall 2013 üyesi

CPSU-AMIDO-F13S11G36

5 Üyeler

7 adet Kılavuz yazıldı

One Comment

very helpful

Thank you

Richard Morgan - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 8

Son 30 gün: 33

Her zaman: 5,488