Giriş

Removing the stand from the rest of the monitor allows you to access and replace parts inside the display assembly.

Before beginning this guide, prepare a clean, flat surface to use as a workstation. Avoid working over carpeting, as small screws are used and, if dropped, may be lost in the carpet.

Parçalar

Hiçbir parçaya gerek yok.

Place the monitor face down on a clean, flat surface.
  • Place the monitor face down on a clean, flat surface.

Yorum Ekle

Firmly remove the back panel of the stand by pulling it up and away from the monitor.
  • Firmly remove the back panel of the stand by pulling it up and away from the monitor.

Yorum Ekle

  • Unscrew the two 6mm Phillips PH2 screws to detach the stand enclosure from the stand.

Yorum Ekle

  • Firmly grasp the stand enclosure with your hand and slide it to base of stand.

Yorum Ekle

  • Unscrew the two 14.5mm Phillips PH2 screws holding the stand to the monitor.

Yorum Ekle

  • Lift the the stand straight up to remove it.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Michela Upson

Üyelik tarihi: 17-10-2013

107 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 11-36, Amido Fall 2013 Cal Poly, Team 11-36, Amido Fall 2013 üyesi

CPSU-AMIDO-F13S11G36

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 331