Giriş

How to disassemble the inside of your Nokia 1100b RH-36 to access the inner components.

Parçalar

Hiçbir parçaya gerek yok.

Flip the phone over so that the screen faces down. Press the gray button on the battery cover and slide it down off the back of the phone.
  • Flip the phone over so that the screen faces down.

  • Press the gray button on the battery cover and slide it down off the back of the phone.

Yorum Ekle

Wedge the flat end of the spudger into the small indent next to the Nokia logo on the battery.
  • Wedge the flat end of the spudger into the small indent next to the Nokia logo on the battery.

  • Gently pry the battery out of the phone.

Yorum Ekle

Firmly grip the back of the casing. Separate the front and back casings either by pulling them apart from the middle or gently prying the front off with your fingers from the bottom.
  • Firmly grip the back of the casing.

  • Separate the front and back casings either by pulling them apart from the middle or gently prying the front off with your fingers from the bottom.

  • Be sure not to bend the casing too much when prying from the bottom. Failure to do so may cause it to crack.

Yorum Ekle

Remove the six 6mm T6 Torx screws around the edge of the front of the phone. Remove the metal frame holding the screen and speaker.
  • Remove the six 6mm T6 Torx screws around the edge of the front of the phone.

  • Remove the metal frame holding the screen and speaker.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

JSwan

Üyelik tarihi: 12-04-2013

499 İtibar

12 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-43, Amido Spring 2013 Cal Poly, Team 10-43, Amido Spring 2013 üyesi

CPSU-AMIDO-S13S10G43

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 13

Her zaman: 1,313