Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

This guide shows you how to access the speaker of your phone, the component which produces sound.

Parçalar

Hiçbir parça belirtilmedi.

  1. Make sure your phone is turned off.
    • Make sure your phone is turned off.

  2. Press the button on the back of the phone and slide the back panel off.
    • Press the button on the back of the phone and slide the back panel off.

    • Remove the battery by pulling it from the phone.

  3. Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.
    • Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.

  4. Retrieve your SIM card.
    • Retrieve your SIM card.

  5. Separate the front cover from the main body of the phone.
    • Separate the front cover from the main body of the phone.

  6. TÜM SEKMELERİ AÇ

    Mac için RAM Yükseltme Kit'leri

    Kit Satın Al

    Tüm Sekmeler İçin Yeterli RAM

    Kit Satın Al
  7. Remove the six screws along the edges of the phone.
    • Remove the six screws along the edges of the phone.

  8. Pull the screen assembly from the base of the phone.
    • Pull the screen assembly from the base of the phone.

  9. Carefully lift the keypad portion of the screen assembly from the circuit board.
    • Carefully lift the keypad portion of the screen assembly from the circuit board.

  10. Separate the screen from the circuit board.
    • Separate the screen from the circuit board.

    • Reconnect the ports during reassembly or the screen will not function properly.

    • Remember to reconnect the screen to the circuit board when reassembling!

  11. Gently push down on the screen to pop it off of the assembly.
    • Gently push down on the screen to pop it off of the assembly.

  12. When the screen falls out the assembly, two white tabs will fall out with it.
    • When the screen falls out the assembly, two white tabs will fall out with it.

    • When reinstalling the screen, insert the tabs with the slanted side pointing upwards so they slide into the assembly.

  13. Set the screen and the tabs aside.
    • Set the screen and the tabs aside.

  14. You can now access the speaker.
    • You can now access the speaker.

    • Note the tab on the end of the speaker. It must be placed in correctly in order to reinstall the speaker.

  15. Remove the speaker from the assembly.
    • Remove the speaker from the assembly.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sterling Fuentes

Üyelik tarihi: 09-04-2010

82 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 29-64, Johann Spring 2010 Cal Poly, Team 29-64, Johann Spring 2010 üyesi

CPSU-JOHANN-S10S29G64

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 1,038