Giriş

We will now remove the logic board from the phone.

Parçalar

Hiçbir parçaya gerek yok.

  1. Hold the phone and push the white button with your thumb.
    • Hold the phone and push the white button with your thumb.

    • While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.

    Yorum Ekle

  2. Locate grey buttons beneath battery (shown).
    • Locate grey buttons beneath battery (shown).

    • Spread buttons simultaneously away from each other and the battery will pop out.

    • Remove battery from phone.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Where shown, spread the front faceplate and push forward.

    • Flip over the device, and pry the faceplate away.

    Yorum Ekle

    • Remove six T6 screws.

    Yorum Ekle

    • Insert spudger between screen assembly and phone body.

    • Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.

    Yorum Ekle

    • Remove logic board as shown.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Nico Lee

Üyelik tarihi: 19-04-2010

54 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 30-41, Garner Spring 2010 Cal Poly, Team 30-41, Garner Spring 2010 üyesi

CPSU-GARNER-S10S30G41

4 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 1,695